Công ty chuyên cung cấp rùa hàn leo Huawei HK-100, rùa hàn đường thẳng đứng leo dọc theo vật liệu.
HK-100 Magnetic Straight Welding Swing Model Oscillation Auto Weld carriage
HK-100 swing welding trolley is automatic. It can gain more wide welded seam at a time.You can adjust swing speed, swing angle, offset position of centre and length of stay. It suits for vary specs beads. In non-welding state, the biggest trolley speed is 1300mm/min.The magnetron hand grip can decrease a few magnetism, so it is convenient to clear iron waste and moving trolley.
Thông số kỹ thuật:
| .Weight | 8.4Kg (Included swing device) | ||
| 2.Outline dimension | 430 mm x 280 mm x 290 mm | ||
| 3.Driving mode | Four rims driving (Rubber rim) | ||
| 4.power | DC 24V | ||
| 5.Swing motor | DC24V | ||
| 6.Speed | 30~~800 (mm/min)( Display by nixie tube) | ||
| 7.Tracking mode | Rail | ||
| 8.Range of adjusting welding torch | Up and down：40mm
Front and rear：60mm. Range of working angle：±45° Range of adjusting angle: 10° |
||
| 9.Operation function | Choose walk direction | Left and right | |
| Swing speed | 0～100 | ||
| Swing angle | ±15° | ||
| Adjust walk speed | 0～130cm/min | ||
| Length of stay on left or right | 0～2.5 s | ||
| Set position of deviation | 0～±8° | ||
| 10.Choose swing model | |||
Thông số kỹ thuật hàn:
| welding wire diameter
welding parameter |
Φ1.2mm | Φ1.4mm | Φ1.6mm | |
|
current（A） |
Down hand welding | 120-300 | 150-380 | 180-430 |
| flush fillet welding | 120-280 | 150-320 | 180-380 | |
| horizontal welding | 120-280 | 150-300 | 180-330 | |
| voltage（U） | 1. U＝14+0.051
2. 300A under U=0.041+16±1.50 3. above 300A U=0.041+20±2.0 |
|||
| distance between nozzle and workpiece（H） | 1. Below 200A: H=10～15mm
2. 200～350A H＝15～20mm 3. 350～500A H＝20～25mm |
|||
| welding extension length（L） | The length is about 10 times welding wire diameter. It is L=10d | |||
